1
/
of
1
Legor OXIFEND5 – Concentrated Anti-Tarnish Passivation Solution for Silver and Copper Alloys (250ml)
Legor OXIFEND5 – Concentrated Anti-Tarnish Passivation Solution for Silver and Copper Alloys (250ml)
Regular price
£76.41 GBP
Regular price
Sale price
£76.41 GBP
Unit price
/
per
Shipping calculated at checkout.
VAT is included at checkout
Couldn't load pickup availability
Legor OXIFEND5 – Concentrated Anti-Tarnish Passivation Solution for Silver and Copper Alloys (250ml)
The Legor OXIFEND5 is a concentrated anti-tarnish passivation solution designed to protect silver, brass, bronze, low-karat gold, and electroplated surfaces. It forms an invisible barrier that dramatically increases resistance to tarnish from hydrogen sulphide, UV exposure, synthetic sweat, and humidity. This solution can be applied chemically or electrolytically, making it ideal for detailed jewellery with hard-to-reach surfaces such as chains and undercuts. One 250ml bottle makes 5 litres of ready-to-use solution when diluted at a 1:20 ratio.
Product Details:
- Solution form: Concentrated liquid
- Colour: Whitish (turns clear when heated and diluted)
- pH: Acidic
- Shelf Life: 18 months
- Dilution ratio: 1:20 (250ml prepares 5L ready-to-use solution)
- Application method: Immersion or electrolytic
Operating Parameters:
- Temperature: 50°C – 60°C (Optimal: 55°C)
- Treatment Time: 5 – 20 minutes (Optimal: 10 minutes)
- pH (ready-to-use): 5.0 – 7.0
- pH (electrolytic with T-SALT): 3.0 – 5.0
- Agitation: Moderate
- Electrolytic Use: Add 2.5g/L of T-SALT and use MMO anodes
Equipment Requirements:
- Materials: Pyrex glass, PVC, or polypropylene tanks
- Heaters: Pyrex, quartz, or PTFE
- Power Supply: DC current rectifier with low ripple
- Anode (electrolytic use): MMO
- Filtration: Magnetic driven filter pump with 50 µm cartridge
- Tank insulation: Recommended for consistent temperature
Pre-Treatment Recommendations:
- Clean items ultrasonically and degrease prior to passivation
- Use neutralisation steps and rinse thoroughly to prevent contamination
Post-Treatment Recommendations:
- Rinse in hot water (60°C – 70°C)
- Dry using hot air (50°C – 60°C)
- Avoid mechanical drying methods
Water Quality:
- Use demineralised water with conductivity below 3 µS/cm for dilution and maintenance
Maintenance Guidelines:
- Monitor refractive index (target: 4 – 6 Brix)
- When R.I. drops by 1 point, add 12.5ml/L of OXIFEND5
- Replace solution every 4–6 months or when naturally exhausted
Safety Documentation:
- Safety Data Sheet
- Technical Sheet
Specifications:
- Weight: 0.3 kg
- Shipping: Hazard Goods
- Brand: Legor
- Solution Type: Anti-Tarnish / Passivation
- MPN: OXIFEND5
Note: Product images are for reference only and may vary from the actual item.
Share
